For my card, I die cut the white panel using a die cut from Spellbinders and used a rainbow embroidery floss for he panel.
The card was finished with the sentiment die cut with a heart and popped up on dimensionals.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I used a black card base and cut out a white card stock then used copic markers to create the bowling lane.
Next, I stamped the bowling pins 3 times and colored with copics. I then cut out the second and third layers so the bowling pins and ball are dimensional. I added dimensionals behind them and finished with the birthday sentiment.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
USEIT2024 - Tassel
I have to say I am very last minute making this card. My son's girlfriend graduates next week, and he asked for a cardinal pop-up card.
I used several Karen Burniston die cuts to create the pop-up cardinal and used a Spellbinders die cut to add the wings.
The graduation cap paper was a stencil used on red paper and I finished with the Spellbinders congratulations die cut out of gold mirror paper.
The card was finished with the closure and some red and white bakers' twine and I found the tassel in my tote of items to use up.
Here is a picture of the cardinal closed.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
Challenges:
For my card, I created this pocket fold using some SU DSP. I added the insert and some twine so it could easily pull out of the pocket fold card.
The card was finished with the birthday sentiment popped up on dimensionals
It was tough to get a good picture of this card as I had to lay it down in my photo box.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I used some paper from my stash and die cut several of the layers adding dimensionals to the hearts. I then used a bunch of the flowers that I punch out of my scraps to add to the card and finished with Nuvo Drops.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I embossed the white layer, die cut 2 lace layers and crimped them.
Next, I stamped the ribbon from DRS Designs and colored in purples then fussy cut the ribbon.
I die cut the labels and popped the ribbon up on dimensionals finishing it with a heart.
The card was finished with a purple ribbon.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I used this great dog stencil that I ordered from a cake decorating company. I used a rainbow of Distress Oxide colors to color the stencil then stamped this great sentiment from DRS Designs.
I finished the card with a few scattered hearts.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I created a fun fold and added some cat paper to the fold. I then die cut the 70 and a couple of cats and added the die cuts to a belly band.
For my card, I sued some Hunkydory images and cut the layers adding a teal layer for accent. I then stamped the birthday sentiment and popped it up on dimensionals and finished with a few gems.
For my card, I used this digital image from Lee Holland. I just love this panda and had to use it for this challenge. I printed it and colored it with copics then sponged some clouds and die cut a few additional clouds stamping the birthday sentiment on the large cloud. and popping two of the clouds up on dimensionals.
I am hoping I can give this to one of my family members to give to me for my birthday. :)
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
USEIT2024 - Image
For my card, I used this cute little chick image from my stack of images needing colored. I colored it with copics then added a frame to the image. I then layered on some easter egg paper and die cut a couple of additional eggs adding some dimensionals. I finished the card with the sentiment and a few flowers from my stash.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I used several paper scraps to create the banner and cup and glued the layers. I left the sentiment off as I can use this for a few different occasions.
USEIT2024 - Image and sentiment
For my card, I went with the Cheer Up option. I had this image in my stack of images needing colored and used. I quickly colored it with copics, added the sentiment also in my stack of already stamped items and cut down the layers.
The card was finished with a few scattered candy dots.
Sitting...Laughing...Remembering...
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I used this cute Spellbinders duct and added some sponging to the layers to give some depth to the duct.
I then die cut the white panel and added the sentiment.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
Challenges:
2 Sisters on the Blog - Farm Animals
Alphabet Challenge - B is for Birds
As You Like it challenge - Clean or Fussy - I like both but I think most of my cards lean towards Fussy
Cardz 4 Galz - Movie Madness(Howard the Duck)
APR24VSNC - In the Same Boat
F4A739 - Happy
USEIT2024 - Boat die cut
For my card, I had this great boat die cut in my tote of items to use up. It was perfect for a very quick card.
I used some distress oxide ink on a craft mat and spritzed some water on it. I then soaked it up with watercolor paper.
Once dry, I stamped the Father's Day sentiment and layered the boat die cut on the front.
Challenges:
613 Avenue Create - Anything Goes / Splash of Color
USEIT2024 - Image
I had this rose image in my tote of items to use up. I cut down the layers, stamped the sentiment and popped it up on dimensionals and finished with a few scattered gems.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
Challenges:
APR24VSNA - "When I was your age!" Vintage/retro style
F4A739 - Happy
USEIT2024 - Bike die cut and black bow
For my card, I had this vintage bike die cut in my tote of items to use up and I thought it would be perfect for the challenge. I cut down the layers and popped the banner layer up on dimensionals tucking the bakers twine under the banner. I then die cut the top banner and added this bow that was also in my tote.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
Challenges:
For my card, I cut the different papers and layered, I die cut the graduation hat and layered it on the die cut oval layers.
I then stamped the congratulations and die cut the banner.
The card was finished with a few scattered gems.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I used several purple papers to create the layers. I tied a purple ribbon around them tucking the sentiment through the ribbon and popping the sentiment up on dimensionals.
The card was finished with several flowers from my stash.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
Challenges:
For my card, I heat embossed this wonderful cross in silver embossing.
I then die cut the two squares and added the sentiment in black on the gray card stock.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
Challenges:
CAS790 - Pretty Polka Dots
For this delightful creation, I adorned the card base with charming pink polka dots.
Following that, I meticulously colored a darling teacup using copic markers and carefully fussy-cut it, elevating it with dimensionals for added depth.
To complete the ensemble, I stamped a sweet Mother's Day sentiment in matching pink, delicately punched it out, and elevated it with dimensionals. A scattering of sparkling gems adds the perfect finishing touch.
Thank you for taking the time to admire my card today. Your kind comments are truly appreciated, and I look forward to returning the favor by visiting your blog if you leave a comment.
Challenges:
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
Challenges:
F4A738 - Make your own background
For my card, I used a paw print stencil and stenciled rainbow colors on the white card stock.
Next, I die cut the cat and heat embossed the sentiment in white on black popping it up on dimensionals
This will be another of my pet donation cards.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
Challenges:
USEIT2024 - Image
For my card, I used this cute kitty image from my stack of image. I colored it with copics then cut the layers. I popped the sentiment up on dimensionals and finished with a few scattered sequins.
This will be another of my pet donation cards.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I used this paw print from Dare to Be Artzy. I stamped it then die cut the layers. I cut down the paw print paper then stamped the sentiment and popped the paw print up on dimensionals.
The card was finished with a gem on the heart on top.
This will be another of my pet donation cards.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I crafted a vibrant ombre panel using four distinct shades of blue oxide inks. Following this, I delicately die-cut the flowers, stamped a heartfelt sentiment, and fashioned a coordinating sentiment banner.
To add depth, I elevated the sentiment banner with dimensionals, and for a final touch of elegance, I adorned the card with a sprinkle of delicate blue sequins.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I used this cute giraffe from DRS Designs. I stamped the bow first then masked it and then stamped the giraffe so I could make the giraffe a girl.
I colored her with copics then fussy cut the image.
For the base I stenciled some stars then popped up the giraffe on dimensionals.
The card was finished with a few scattered yellow sequins and the pink Congratulations sentiment.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
| FS896 - This week's incredibly talented featured stamper is Darlene aka DStamps. Her gallery is wonderful, full of so much amazing inspiration I found this INSPIRATION. I love how Darlene used the paper scraps and used that as my starting point for this card. I used a bunch of scraps along the right side of the card from my purple designer paper scraps. I finished the front with a couple of larger purple scraps, then added it to a few additional layers. The card was finished with the sentiment stamped in purple popped up on dimensionals and a few scattered purple sequins. Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit. Purple Birthday |
USEIT2024 - Image
When I saw the inspiration, I knew I had this image in my tote of items to use up and it is perfect. It is from Hunkydory.
I cut the layers, stamped the sentiment and popped the sentiment up on dimensionals.
The card was finished with a few candy dots.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I die cut this spellbinders tractor and layered. The tractor is layered on some velum and then the birthday banner was added. I finished the card with a few scattered pearls.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I die cut the tag then added the music box and colored it with copics.
I then added a few scattered music notes from my stash and tied on the fancy fibers to the tag.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, used this great baseball paper and cut down the layers. I added a few scattered stars from my stash then die cut the baseball bat and finished with this puffy baseball sticker.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
For my card, I die cut the center panel from a scrap watercolor paper and sponged the panel with 2 different blue distress oxide inks. I then spritzed with water.
Next, I die cut the clouds and umbrella and layered and finished with heat embossing the sentiment in white on black card stock.
Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.
