Angel Wings

 

MMTPT745 - Light Blue

This card came together rather quickly.  I used a pale blue textured card stock for the base and heat embossed the sentiment in white.

Next, I die cut the angel wings and heart and sponged blue distress ink in the opening of the die cut. The wings and heart were popped up on dimensionals.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Angel Wings

Let's Talk Turkey

 

CAS714 - Leaves

For my card I used this cute turkey image from DRS Designs and colored it with copics. I then fussy cut it and popped it up on dimensionals.

On the red layer I used the Let's Talk Turkey sentiment and heat embossed it in white on the red card base that I used a shaping tool to add a couple of lines.

I finished this card off with a few punched leaves from my stash.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Let's Talk Turkey

Lion Birthday

 

FS821 - This week's incredibly talented Featured Stamper is Leslie aka turnerl58. Her gallery is amazing and full of inspiration. Here is my INSPIRATION

USEIT2022 - Postcard

Years ago, my MIL gave me a stack of post cards with all kinds of animals wearing crowns. Well, that stack of postcards is in my tote to use up. When I saw Leslie's card, I just had to pull out the lion.

This was seriously the fastest card I have ever made. I cut the post card down, stamped the sentiment and glued to the card base.

Many years ago, my brother gave me the only rubber stamp in his home when I was over visiting. It was of a lion. I think this is a perfect card to give to him for his birthday.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Lion Birthday

Santa

 

IC882 - The Jolly Christmas Shop & Pinterest - INSPIRATION

I used this cute Spellbinders Santa die cut to create my card. I cut the layers and added some color to each of the layers then layered. I added white highlights and colored the beard with copics.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Santa

Santa Bear

 

WT920 - Teddy Bears (Theodore Roosevelt born on this day in 1858). 

For my card I used my Cricut to cut out the cute Santa Bear. I added sponging to the layers and added a few dimensionals to some of the layers.

Once the bear was pieced I added a few white highlights to him.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Santa Bear

Postal Christmas

 

SC929 - This week's Sketch on splitcoaststampers.com

CCC22OCT - Warm glow of a fireplace, streetlight, etc

I created this card using the mailbox die cut from Spellbinders. Once the pieces were cut I die cut the sun, added some sponging around the sun and to the card base and glued the pieces.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Postal Christmas

Pasta Baby

 

MMTPT744 - Pasta

This is the only pasta image I could find in my stamps, and he is just too cute to not use for the challenge.

I colored him up with copics and cut the layers. the card was finished with some yellow sequins from my stash.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Pasta Baby

As You Retire

 

CAS713 - Pop It Up

I have a friend that is retiring soon and he says he will be doing more riding. I thought this motorcycle would be perfect for a retirement card.

I stamped the windmill image and sentiment on the card base and colored the with copics. 

Next, I stamped the motorcycle image, colored it with copics then fussy cut it and popped it on dimensionals.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

As You Retire

Santa

 

FS820 - Yoo-Rah Lee aka yoorah here is my INSPIRATION

CCC22OCT - Warm glow of a fireplace, streetlight, etc

USEIT2022 - Santa Image

I was given a stack of Christmas images and when I saw Yoo-Rah's card I decided it was time to pull out some of those images for a card and use this Santa image.

I used two of the sheets if images and fussy cut one of the images and popped it up on dimensionals on the second image.

I then stamped the sentiment and popped that on dimensionals.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Santa

Birthday Balloons

 

IC881 - Party City - INSPIRATION

F4A661 - Die cuts

For my balloons I used the Spellbinders die and cut out several blues and white and alternated the blue and white so I could get 2 cards.

The balloons were popped up on dimensionals and a few sequins were scattered. The card was finished with the birthday sentiment heat embossed in white with one of the blues from the balloons.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Birthday Balloons

Elaina

 

F4A661 - Dies

MIX508 - Common Thread

For my common thread I used some embroidery thread that is rainbow colored my MIL gave me. It has been hanging on the back of my craft chair for nearly 3 years waiting for the perfect project.

I die cut my sister's name using the spellbinders letters die cuts then did a couple of different stitches to fill in the stitching holes.

Once it was complete, I popped the letters up on dimensionals.

The blue paper layer is a fancy fiber paper with lots of texture and I thought it was perfect to add to the textured name.

The card was finished with the birthday sentiment from Trinity and gems were added to the starburst stitching in the letters.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Elaina

Birthday Bear

 

WT919 - Buttons

USEIT2022 - Image & Brads

I needed to use up this image from my stack of images. My niece stamped this for me many years ago and I finally got it colored up. I think I may send this to her for her birthday.

I added a few scattered heart brads also from my tote and finished with the birthday sentiment.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Birthday Bear

Window Kitty

 

SC928 - This week's sketch on splitcoaststampers.com

CC918 - Orchids, Curry & Olives

For this card I had this partial image in my scrap paper drawer and thought it would be great framed in a window die cut. I popped the window up on dimensionals and added this cute die cut kitty and some yellow sponging to the cat.

The scene was finished with the birthday sentiment.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Window Kitty

Welcome Pup

 

CC918 - ORCHID OASIS, CRUSHED CURRY, OLD OLIVE

USEIT2022 - Dog Image

I needed to use up this image from my tote and thought it was perfect to add a flower to include for today's color challenge. Once the image was glued I added the sentiment and flower.

This is for my monthly donation.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Welcome Pup

Thinking of You

 

MMTPT743 - Force of Nature

For my card I die cut this adorable squirrel from Simon Says Stamps out of brown and tan and used my daubers and distress inks to color him.

Once colored I layered and added some grass and flowers from off my table and finished with the sentiment and Nuvo Drops.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Thinking of You

Happy Halloween

 

CAS712 - Stripes

WT917 - Inspired by Halloween

F4A65 - Halloween

For my card I wanted to play with this color combination to create a spooky sky and through a fun Halloween image would be great. I used burgundy, red, orange and 2 different yellows and blended to get the sky.

I also used 2 yellows for the moon and added some grey to the frame.

The image was popped up on dimensionals and I added 2 black stripe stripes to the top and bottom to pick up the stripes on the image in the frame.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Happy Halloween

Dancin Snowman

 

FS819 - This week's incredibly talented Featured Stamper is tweedcurtain - Charmaine. Her gallery is full of incredible inspiration. I found this INSPIRATION

I used a snowflake designer paper for my card base. Next I cut the pieces to the snowman and assembled and added a dimensional to his body so the legs swing.

Finished the card front with the sentiment from Trinity.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Dancin Snowman

Heartfelt Sympathy

 

IC880 - Urban Owl - My INSPIRATION

I needed to make a few more cards for my donation and today's inspiration was perfect. This was quick to add to the stack. I die cut the paw print, and the back layer. I then heat embossed the sentiment and sprinkled with a few hearts.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Heartfelt Sympathy

Birthday Dragon

 

WT918 - Fairy Tale Inspired

USEIT2022 - Dragon image

I know many fairy tales that have dragons. This dragon image was in my stack of images needing used and perfect for the challenge.

I colored the image with copics then cut the layers. Once glued down I added a few candy dots from my stash.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Birthday Dragon

Halloween Kitty

 

SC927 - This week's sketch on splitcoaststampers.com

WT917 - Halloween Inspired

F4A659 - Halloween

USEIT2022 - Cat image

I needed to use up this cat image from my stack of images and thought it would be perfect for another quick Halloween card.

The image was colored with pencils. I then cut the layers and added a few orange flowers.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Halloween Kitty

Fairy Birthday

 

CC917 - Bermuda Bay, Parakeet Party & Highland Heather

I colored this image up with today's colors (or as close as I have in my collection).

I added a bit if stickles to her wings to add some shimmer to them.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Fairy Birthday

Racecar

 

MMTPT742 - your town is known for...

For my card I used a racecar image, colored it up with copics and fussy cut it. I also stamped the flame and colored that with copics.

The card base is tinfoil that I ran through a tire emboss folder and once everything was glued down, I popped the car up on dimensionals.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Racecar

Spirit of Halloween

 

CAS711 - Things that Fly

WT917 - Halloween Inspired

F4A659 - Halloween

I did not get a chance to play in the Free for All challenge and thought another Halloween card would be perfect especially since my image has a bat in it perfect for the CAS challenge of things that fly.

For my background, I put a circle mask then sponged the setting sun with a few yellows, orange and then I added a bit of black to the bottom and blended the colors.

Once the colors were added I stamped the sentiment and tree trunk.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Spirit of Halloween

Herringbone Birthday

 

FS818 - This week's incredibly talented Featured Stamper is SuZ! (pixordia). Her gallery is full of wonderful inspiration. I found this INSPIRATION

I have been going through my orange scrap papers here lately and when I saw SuZ's card I went back to my orange scrap papers and pulled out some. Rather than doing the Bargello technique I did the Herringbone technique cutting the strips down and laying them out on a blue card stock base.

Once the panel was created I finished with some flowers from my stash and the birthday sentiment.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Herringbone Birthday

Many Thanks

 

IC879 - Pumpkin Time - Here is my INSPIRATION

USEIT2022 - Ribbon

I love the different colors on the pumpkin edge and decided to add strips of different designer papers to my card front. Once the papers were glued down I added a die cut bird and finished with the ribbon from my tote.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Many Thanks

Fun Halloween

 

WT917 - Create a card inspired by Halloween (does not have to be a Halloween card)

These cards started with me trying to use up the scrap Halloween paper. I cut the layers then used my Cricut to cut the fun Halloween critters adding some sponging to a few of their layers and a bit of white gel for some highlights.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Fun Halloween

Scrappy Thanks

 

SC926 - This week's Sketch challenge.

I have been going through my scrap drawers and punching out and die cutting a bunch of the scraps with circles and coordinating them by color. For this card I used the blacks, greys and silvers and popped them all up on dimensionals.

The card front was layered on gray card stock then the sentiment was heat embossed.

I finished the card with some scattered gems.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Scrappy Thanks

Little Girl

 

MMTPT741 - Use Embellishments

USEIT2022 - Image

I needed to use up this image and thought it would be perfect to add a bow embellishment. I colored her up with copics, cut the layers, added the embossing and finished with the image popped up on dimensionals.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Little Girl

Happy Thanksgiving

 

CAS710 - Fall colors

I love the spotlight technique and thought it would be great for this image. For the image I stamped it on the card base then stamped it again on white card stock along with the sentiment.

I then colored the image with copics and cut down the panel with a die cut. I then popped the panel up on dimensionals.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Happy Thanksgiving

Happy Anniversary

 

FS817 - This week's incredibly talented Featured Stamper is Renata aka Renata Joyner. I found this INSPIRATION

I loved the large heart and it was perfect inspiration to create an anniversary card.

I cut the layers and die cut the heart and key.

For the red base I embossed the paper then used a gold metallic rub over it to give the card a vintage feel then popped some of the layers up on dimensionals.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Happy Anniversary

Just a Note

 

IC878 - Reproduction Gallery & Pinterest where I was inspired by the art The Red Egg

USEIT2022 - Images - Ephemera 

I had these images (Nest and Egg) in my tote needing used up and the inspiration was perfect for me to create a card with them.

I grabbed some papers that had similar colors and created the layout. The single egg is popped up on dimensionals as well as the sentiment.

The card front was finished with a few scattered gems.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Just a Note