Dragonfly Thanks

 

WT1003 - Dragonflies

USEIT2024 - Dragonfly

I needed to use up more dragon flies from my tote and this challenge is perfect. I had this already embossed piece in my tote so I cut it down and added dimensionals.

Under the embossed panel I added a couple of banner ribbons and the card was finished with the stitching on the card and dragon fly as well as a few scattered blue pearls and the thank you sentiment popped up on dimensionals.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Dragonfly ThanksDragonfly Thanks

Red, White and Blue Graduation

 

SC1012 - this week's sketch on splitcoaststampers.com

USEIT2024 - Graduation stickers

For my card, I used some reds and blues to create this layout. I added 2 pieces of designer paper that is lined school paper then added the stickers and finished with a few punched stars.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Red, White and Blue GraduationRed, White and Blue Graduation

Cardinal Birthday

 

CAS527 - Put the Sun on your cards

FS903 - This week's wonderful, featured stamper is Linda (fischer01). I was inspired by this card.

For my card, I ended up with this leftover cardinal after making graduation cards this year and I thought he could use a fun sun behind him.

I masked the panel, sponged some yellow then removed the mask and lightly added a bit of yellow to the sun.

I die cut the branch and finished with the birthday sentiment.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Cardinal BirthdayCardinal Birthday

Thank You Glasses

 

WT1002 - Glasses

For my card, I used this SU stamp my mom picked up for me from a garage sale. I layered it on a black and white DP and finished with a die cut pair of glasses and a couple of hearts.

My MIL asked for a few thank you cards, so this is headed to her to add to her stash.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Thank You GlassesThank You Glasses

Puppy Thanks

 

SC1011 - this week's sketch on splitcoaststampers.com

For my card, I used several papers and found some coordinating scraps to create this layout. I added a couple of hearts and a punched dog and finished with the Thanks sentiment and a few scattered black gems.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Puppy Thanks

Birthday Cake

 

CAS795 - Sweet

For my card, I recently picked up this My Favorite Things die cut and wanted to use it. I stitched a birthday cake on a tag, added a ribbon and layered on an embossed white background.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Birthday Cake

Kitty Thanks

 

IC963 - Made in B and Pinterest - Inspiration

USEIT2024 - Image

For my card, I pulled out this kitty stamp that was in my stack of images needing colored and used. I colored it with copics then cut down the layers.

I popped the sentiment up on dimensionals and added a few scattered gold pearls.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Kitty Thanks

Harley Girl

 

WT1001 - Hand Drawn

For my card, I hand drew this image and colored her with copics.

I really love how this came out as she reminds me of my niece. So I might need to send this to her.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Harley Girl

Birthday Pup

 

SC1010 - This week's sketch on splitcoaststampers.com

For my card, I used this cute Hunkydory image and cut out the layers. I then added the birthday sentiment and an offset black layer and finished with a few hearts.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Birthday Pup

Hogs N Kisses

 

CAS794 - Splatters

For my card, I used this cute Whipper Snapper image and colored it with copics. I then added some brown paint under it and splattered more around the image.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Hogs N Kisses

Birthday Bike

 

FS901 - This week's incredibly talented Featured Stamper is Josanna aka JosannaP. Here is my INSPIRATION.

USEIT2024 - Bike die cut from my tote.

I was inspired by the bike and used that as my starting point as I had this bike die cut in my tote needing used.

I cut out some gingham paper to mirror the hexagon emboss folder and then I added a number strip rather than fancy fiber.

I added a couple of balloons on dimensionals and the birthday sentiment.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Birthday Bike

Big Ben

 

IC962 - Liz Marie & Pinterest - INSPIRATION

USEIT2024 - Image

I needed to use up this image from my tote. For the card base and the image, I used a paper distress tool and distressed all the edges, I then added some tan distress oxide to the card base and the blue layer.

Under the image, I cut a doily in half and tucked it under the corners. I then used a brad in the upper left corner and several flowers from my stash finishing them with pearls.

The ribbon was tucked around the image and the blue layer.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Big Ben

Masculine Birthday

 

WT1000 - Eye popping - Google Eyes

USEIT2024 - Bow

For my card, I die cut the hat and mustache and added ribbon under the hat then popped them up on dimensionals.

I die cut the glasses and added google eyes and finished with the bow from my tote and the birthday sentiment.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Masculine Birthday 

Poppies Thanks

 

SC1009 - this week's sketch on splitcoaststampers.com

USEIT2024 - Die cut poppies

For my card, I found this poppy die cut in my tote needing used up. I used a couple of emboss layers adding black and silver to add interest to the card.

I added a thick black ribbon and finished with the sentiment popped up on dimensionals and a few scattered gems.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Poppies Thanks

Mothers Day Poppies

CAS793 - Spring Flowers

For my card, I used The Ton poppy stencil and a few different distress oxide colors to create the poppies.

I finished the card with a sentiment from Trinity and a few scattered gems.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Mothers Day Poppies

Birthday Daisies

 

IC961 - Cup of Needles & Pinterest - INSPIRATION

USEIT2024 - Flowers

For my card, I found these die cut flowers in my tote. I added some copic coloring to them and then layered on the blue swiss dot paper.

I finished with the birthday banner popped up on dimensionals and several blue pearls.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Birthday Daisies

Art Education Graduation

 

WT999 - Fancy Fold

My son's girlfriend graduates on Saturday and this is the card I made for her.

I used the Divinity Design step die cut to create the step card and then added some great paper to the inside. I die cut the circles and the 2024 adding those to the steps.

The cap and class of are also die cuts from Divinity and the scroll is from Penny Black.

The sentiment is from Unity and I finished the scroll off with a bit of ribbon from my stash that my son's girlfriend helped me clean up from bags of ribbon that was given to me by friends and family.

Fun Fold

Here is the front of the card:

She is graduating with an Art Education degree. So, for the front of the card, I die cut the Spellbinders art pallet and used several colors of Distress Oxide to add color to the pallet.

Next, I die cut the paint brushes and watered down some acrylic paint in red, yellow and blue for the tips of the brushes. I then added full acrylic paint to the die cut paint drops and popped those up on dimensionals.

I then die cut the hat and scroll out of paper scraps and the paint tube and popped the tube up on dimensionals.

For the sentiment, I downloaded a certificate font and typed that in word. I then die cut the panel and popped it up on dimensionals.

The front of the card was finished with a few clear sequins.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Art Education Graduation

Birthday Pups

 

SC1008 - This week's sketch on splitcoaststampers.com

For my card, I used this great Hunkydory image and cut the layers. I then stamped the sentiment and off set the black layer for the sentiment. The sentiment is then popped up on dimensionals.

I finished the card with a few hearts that I punch out of my scrap papers.

This will be another card for my pet donations.

Thank you for stopping by to check out my card today. I appreciate the lovely comments. If you leave me a comment, I can stop by your blog for a visit.

Birthday Pups